Assembly is EASY, anyone can do it. All you need is a
Phillips screwdriver. All hardware is included with the horns
along with a copy of these instructions. Before you begin you
should have a loose horn, a horn that is on the mount, the
back mounting board, a leather piece, and a bag with these
instructions and screws.
Because of the shape of the horn, the easiest place to
assemble them is on your lap.
First put the loose horn over the
wooden end of the mount. Align the
arrows on the front and back of the
horn with the arrows on the mount.
See picture 1.
Next, start all of the other silver screws into the black marked holes on the horn.
Once all the screws are started and horn is in place tighten until all screws until
they are snug.
See picture 2.
Picture 2
Next take the leather piece and align the end marked BOTTOM, with the
bottom holes marked in red on the horn and mount and tighten screws down.
Next, wrap the leather piece around the horn and line up the screws with the
top holes, marked in red, and tighten.
See picture 3.
Next insert the long screws into the two top holes of the mounting plaque until
about a half inch of the screw shows
See picture 4.
Picture 4
Pick the horns back up and set the screws into the top holes on the mount that
are marked in black, on the back of the mount. Tighten the screws down until
they are snug. Screw the remaining two screws into the oak board and tighten
down. Once all screws are in place make sure all screws are tight and your horns
are ready to be hung.  See picture 5.
Picture 5
If you have any problems or questions please call 877-871-5283 or
e-mail sales@droverhouse.com and we will be happy to help.
Picture 1
Picture 3
Assembly Instructions
Order online or call toll free
877-871-5283